Injector Sleeve Tool Kit for 2008-2010 Ford Powerstroke 6.4L
Made in Pensacola, FL. USA
Kit Includes:
Sleeve Removal/Installation Tool
8 – Injector Sleeves
8 – Injector O-Ring Kits
8 – Fuel Injector Lines
Please call if you are looking for the Tool only
Ford 6.4L Powerstroke Reman Injector Superkit
Fits 2008-2010 Ford 6.4L Powerstroke
Kit Includes:
8 – Remanufactured Injectors (New nozzles in every rebuild)
8 – New Fuel Lines
8 – Glow Plugs (Made in USA)
1 – Complete Rocker Cover & Valve Cover Set (Victor Reinz VS50503)
$1200.00 Core Charge
*Never pay a Core Charge if returned within 30 days*
Please read our Core Policy
*We Pay Return Core Shipping*
58 Volt Fuel Injection Control Module (FICM) for 2003-2009 Ford Powerstroke 6.0L
GB Remanufacturing # 921-158P
Replaces Ford # FICM-1-RM / HC3Z-12B599-ARM
Features:
Verifying 58 Volt Operation:
Because the FICM monitors and communicates the voltage supplied to the injectors to the PCM, the 58 volts would be perceived by the PCM as being too high, this would normally result in a diagnostic code P0611 (FICM Performance Failure). Because of this, the FICM has been re-calibrated to transmit 48 volts to the PCM when in fact the voltage to the injectors is 58 volts. This ensures that the self diagnostic capabilities for the FICM and PCM remain intact. If you monitor the “FICM_MPWR” voltage parameter via a scan tool you will see 48 volts. If you would like to verify the FICM is actually delivering 58 volts, you may do so by measuring the injector voltage at the back of the FICM using procedure A on this document (58V 6.0L Arctic Power Volt FICM Tech Bulletin).
$150.00 Core Charge
*Never pay a Core Charge if returned within 30 days*
Please read our Core Policy
Fuel Injection Control Module (FICM) X-2 Connector with Pigtail
For 2003-2010 Ford Powerstroke 6.0L
Field data shows identification marks 1456315-2 or X-2
Reference # AP0032
Easily repair your FICM connector with this cost effective solution instead of replacing the entire harness.
*This is an aftermarket connector and will have all white wires – Picture is for display purposes only*
C1388B (X2) Connector:
Injector Control, Cylinders 2, 3, 5, 8
Fuel Injection Control Module (FICM) X-1 Connector with Pigtail
For 2003-2010 Ford Powerstroke 6.0L
Field data shows identification marks 1456315-1 or X-1
Reference # AP0033
Easily repair your FICM connector with this cost effective solution instead of replacing the entire harness.
*This is an aftermarket connector and will have all white wires – Picture is for display purposes only*
C1388A (X1) Connector:
Injector Control, Cylinders 1, 4, 6, 7
Fuel Injector Sleeve Cleaning Kit for Ford Powerstroke
Works on Ford 4.5L LCF, 7.3L, 6.0L, 6.4L, & 6.7L
Also works for the following applications: Caterpillar 3126, C7, C9, Navistar T444E/DT466/VT365/VT275, MaxxForce 5/7/DT/9/10/N9/N10, GM/Chevrolet 6.6L, Dodge/Cummins 5.9L/6.7L, John Deere 4.5L/6.8L/8.1L/9.0L HPCR, Isuzu 4HK1/6HK1 HPCR
Brush Set Includes:
1 – Stainless Steel Spiral Tube Brush
1 – Stainless Steel Flat Bottom Brush
Made In USA
Primarily used to clean carbon build up out of the injector sleeves, but also a great tool for scraping away rust, carbon, and dirt in tight spots to keep the engine clean. Make the job easier by having the correct tools.
Fuel Pressure Regulator Kit for 2003-2007 Ford Powerstroke 6.0L
Reference # 3C3Z-9T517-AG / 904-239
Updated Fuel Pressure Regulator
The kit includes all the O-Rings and hard parts to rebuild the fuel pressure housing.
New Fuel Injection Control Module (FICM) Board for 2004-2010 Ford Powerstroke 6.0L
The FICM on certain Ford and Navistar vehicles is mounted in a location where it’s exposed to constant heat and vibration, often causing the internal inverter board to stop working properly. When that happens, the only replacement available from the OEM is a complete module assembly, with a housing, controller board and power board, that needs to re-initialized to the vehicle using proprietary programming tools. This fuel injector control module repair directly replaces only the inverter board to reduce the overall repair cost as well as avoid having to program the module, allowing for a DIY repair.
The best board at the best price.
Fits all 2004-2010 Ford Powerstroke 6.0L
No Core Charge
Cross Reference # 904-229
Valve Cover Harness for 1998-2003 Ford Powerstroke 7.3L
Dorman 904-200
*Requires one per side*
Restore your vehicle’s fuel economy, and return your diesel engine to its original performance, with Dorman’s Fuel Injection Harness.
We also offer Fuel Injector Clips, sold seperately.
– Wires are insulated for a high corrosion resistance and a long service life
– Direct replacement for a proper fit every time
– Stops rough idling due to Fuel Injection Harness failure
– Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards.
Fuel Line & O-Ring Kit for 2008-2010 Ford Powerstroke 6.4L
Alliant Power AP0027
Ford recommends changing line with injector
New Line, O-Ring, & Gasket
